量具量仪中英文对照汇总

　　1.刀口型直尺:knife straigjht edge　2.刀口尺: knife straigjht edge
 

　　3.三棱尺three edges straigjht edge
 

　　4.四棱尺four edges straigjht edge
 

　　5.条式和框式水平仪bar form and square levels
 

　　6.合像水平仪imaging level meter
 

　　7铸铁平板cast iron surface plate
 

　　8.岩石平板granite surface plate
 

　　9.铸铁平尺cast iron straigjht edge
 

　　10.钢平尺和岩石平尺steel and granite straigjht edge
 

　　11.圆度仪roundness measuring instrument
 

　　12.电子水平仪electronic level meter
 

　　13.表面粗糙度比较样块铸造表面roughness comparison specimens cast surface
 

　　14.表面粗糙度比较样块磨、车、铣、插及刨加工表面roughness comparison specimens-ground,turned,bored,milled,shape and planed
 

　　15.表面粗糙度比较样块电火花加工表面roughness comparison specimens spark-erostion machining surfaces
 

　　16.表面粗糙度比较样块抛光加工表面roughness comparison specimens pollshed surfaces
 

　　17.接触式仪器的标称特性
 

　　18.轮廓profiles
 

　　19.轨迹轮廓traced profile
 

　　20.基准轮廓reference profile
 

　　21.总轮廓total profile
 

　　22.原始轮廓primary profile
 

　　23.残余轮廓residual profile
 

　　24.触针式仪器stylus instrument
 

　　25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus instrument
 

　　26.触针式仪器的部件stylus instrument components
 

　　27.测量环measurement loop
 

　　28.导向基准renfence guide
 

　　29.驱动器drive unit
 

　　30.测头(传感器) probe(pick-up)
 

　　31.拾取单元tracing element
 

　　32.针尖stylus tip
 

　　33.转换器transducer
 

　　34.放大器amplifier
 

　　35.模/数转换器analog-to-digital converter
 

　　36.数据输入data input
 

　　37.数据输出data output
 

　　38.轮廓滤波和评定profile filtering and evaluation
 

　　39.轮廓记录器profile recorder
 

　　40.仪器的计量特性metrological characteristics of the instrument
 

　　41.静测力的变化change of static measuring force
 

　　42.静态测力static measuring force
 

　　43.动态测量力dynamic measuring force
 

　　44.滞后hysteresis
 

　　45.测头的测量范围transmission function for the sine waves
 

　　46.仪器的测量范围measuring range of the instrument
 

　　47.模数转换器的量化步距quantization step of the ADC
 

　　48.仪器分辨力instrument resolution
 

　　49.量程分辨力比range-to-resolution ratio
 

　　50.测头线性偏差probe linearity deviation
 

　　51.短波传输界限short-wave transmission limitation
 

　　52.轮廓垂直成分传输vertical profile component transmission1
 

　　53表面粗糙度比较样块抛丸、喷砂加工表面roughness comparison specimens shot blasted and blasted surfaces
 

　　54产品结构几何量计术规范(GPS)geometrical product specifications(GPS)
 

　　55表面结构surface texture
 

　　56接触式仪器的标称特性nominal characteristics of contact instruments
 

　　57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth
 

　　58最大允许误差maximum permissible error
 

　　59圆柱直齿渐开线花键量规gauges for straight cylindrical involute splines
 

　　60齿厚游标卡尺Gear tooth vernier calipers
 

　　61齿轮渐开线样板the involute master of gear
 

　　62齿轮螺旋线样板the helix master of gear
 

　　63矩形花键量规gauges for straight–sided splines
 

　　64测量蜗杆master worm
 

　　65万能测齿仪universal gear measuring instrument
 

　　66万能渐开线检查仪universal involute measuring instrument
 

　　67齿轮齿距测量仪gear circular pictchmeasuring instrument
 

　　68万能齿轮测量机Universal gear measuring machine
 

　　69齿轮螺旋线测量仪gear helix measuring instrument
 

　　70便携式齿轮齿距测量仪manual gear circular pitch measuring instrument
 

　　71便携式齿轮基节测量仪manual gear base pitch measuring instrument
 

　　72立式滚刀测量仪vertical hob measuring instrument
 

　　73齿轮双面啮合综合测量仪Gear dual-flank measuring instrument
 

　　74齿轮单面啮合整体误差测量仪Gear single-flank meshing integrated error measuring instrument
 

　　75梯形螺纹量规gauges for metric trapezoidal screw threads
 

　　76工作螺纹量规work gauges for metric trapezoidal screw threads
 

　　77校对螺纹量规check gauges for metric trapezoidal screw threads
 

　　78.梯形螺纹量规型式与尺寸Types and dimensions of metric trapezoidal screw threads
 

　　79.普通螺纹量规型式与尺寸Types and dimensions of gauges purpose screw threads
 

　　80.非螺纹密封的管螺纹量规Gauges for pipe threads prcessure-tight joints are not made on the threads
 

　　81.螺纹千分尺Screw thread micrometer
 

　　82.最大允许误差maximum permissible error
 

　　83.间隙螺纹量规Clearance screw gauge
 

　　84.量针Bar gauge
 

　　85.螺纹样板Screw thread template
 

　　86.用螺纹密封的管螺纹量规Gauges for pipe threads where pressure-tight joints are made on the threads
 

　　87.刀具预调测量仪精度Accuracy of the presetting instrument
 

　　88.薄膜式气动量仪Membrane type pneumatic measuring instrument
 

　　89.光栅线位移测量系统Grating linear displacement measuring system
 

　　90.光栅角位移测量系统Grating angular displacement measuring system
 

　　91.磁栅线位移测量系统Magnet-grid linear displacement measuring system
 

　　92.量块附件Accessories for gauge blocks
 

　　93.V形架Vee blocks
 

　　94.比较仪座Comparator stand
 

　　95.磁性表座Magnetic stand
 

　　96.万能表座Universal stand for dial indicator